Waves Tutorial 1 - Progressive Waves

Waves are caused by oscillations.  Oscillations are complete to-and-fro movements, of which vibrations are one example.  Another example is the oscillation of electrons, which cause radio waves. We will study oscillations in more detail with simple harmonic motion.

Question 1

Write down three different examples of oscillations.

Answer

Waves occur when a disturbance at the source of the wave causes particles to oscillate about a fixed central point.  There is a maximum displacement from the central point, which is called the equilibrium position.  When particles reach that maximum displacement, they start to move towards the central point. They pass through the central point as they move to the maximum displacement on the other side.

Question 2

What are the features of wave motion?

Answer

We can show this on a water wave.  The particles of water oscillate up and down from the equilibrium position.  The wave is travelling from left to right.  P is going down, Q is at the maximum displacement, and R is going up.

The wave is called a progressive wave because it is moving in a particular direction.  It is transferring energy from the point of disturbance, but the particles are not travelling with the wave, merely going up and down.

Question 3

How is energy transferred if particles do not travel with the wave?

Answer

Waves can be considered to travel either as plane wave-fronts, from a plane source or as circular wave-fronts from a point source:

In 3 dimensions, the waves would propagate spherically from a point source.

Terms Used with Waves

Displacement of a particle is the distance at any given moment from the central or equilibrium position, i.e. the undisturbed position.  It is given the Physics Code s or x, and the SI unit is metre (m).  The displacement decreases the further the wave progresses from its source.

f = 1/T

 

Question 4 

What do you understand by these terms?

Displacement

 

 

Period

 

 

Frequency

 

 
Answer
Question 5

On a copy of the picture below, add the following features:

  • Wavelength

  • Amplitude

  • Crest

  • Trough

  • Direction of disturbance.

 

 

 

 

 

 

 

 

 

 

 

Answer

 

 

The Wave Equation

The frequency, speed, and wavelength of any wave can be linked by the simple equation:

 

v = fl 

where v is the speed of the wave in m/s, f is the frequency in Hz, l is the wavelength in m.

When we use this equation, we do not always have to use SI units, but it is important to be consistent.

Worked Example

What is the frequency of water waves of wavelength 4 cm travelling at a speed of 1.6 m/s?
Formula first: v = fl
Rearrange: f = v/l

f = 1.60 m/s = 40 Hz 

       0.04 m

The wave equation is used for longitudinal and transverse waves.  Note that when we use the equation for light or radio waves, we use the code c for the speed of light - c = 3.0 ´ 108 m/s.  So the equation is written c = fl.

Question 6

A ripple tank dipper makes 8 water waves in a time of 2s.  When it is just about to make the 9th wave, the first wave has travelled 48 cm from the dipper.

(a)    What is the frequency of the waves?

(b)   What is the wavelength of the waves?

(c)    What is the wave speed?

Answer

 

Phase

When a wave is travelling, all the particles are in continuous motion.  The different particles have different displacements, velocities and directions.  Indeed this is true even of adjacent particles. The phase of a particle is the fraction of the cycle a particle has passed through relative to a given starting point.  We describe the difference in the motion of particles in terms of the phase difference.  This is the fraction of a wavelength by which their motions are different.

Consider the two particles X and Y X is at the trough of a wave, whereas Y is at the crest. Their directions are upwards and downwards respectively.  They are half a wavelength (l/2) out of phase.  By linking oscillation to rotary movement, we can also describe X and Y as being 180o or p radians out of phase.  We say that these particles are in antiphase.

W and Z are one wavelength, 360o or 2p radians apart.  They are both at the starting point of a cycle.  Their motion, including displacement, velocity and direction, is identical.  We can therefore say that they are in phase.  Particles can be any amount out of phase.

If we have two waves, we can measure their path difference.  If the waves have a path difference of 1 wavelength (or any other whole number of wavelengths), they are in step or in phase.  Waves with a path difference of 1/4 wavelength have a phase difference of 1/4 of a cycle (90o or p/2 rad).  If they have a path difference of 1/2 a wavelength, the waves are in antiphase.  Path difference is important when we analyse how waves superpose.

Question 7

On the picture below, draw a second wave that is lagging the first wave by 90o, i.e. it’s behind the first wave.  Draw another wave that is p radians out of phase.  Is it leading or lagging?

 

Answer

 

 

The phase can be calculated for any points on the wave that are d metres apart, using the relationship:

 

Phase (f) = 2pd

                 l

The term d is the distance between the two points.  The curious symbol f is ‘phi’, a Greek letter ‘f’, used as Physics code for phase angle.

The angle in this relationship is in radians, where 2p rad = 360 o.  Hence 1 rad ≈ 57 o

When you use radians, you must ensure that your calculator is set to radians.  The easiest way to lose marks is put your angle in radians while you are set to degrees…

 It is up to you to make sure how to work your calculator.

 Radians is a dimensionless unit, and some people leave it out.  In these notes I will always use the shorthand rad

The graph is a summary of phase relationships: